EE Envornment Test Flow

Leg-4Mechanical Loads(3 pcs)

Leg-10EMC(3 pcs)

Leg-2Vibration &Mechanical  Shock(3 pcs)

E/E Component EnvironmentTest Flow

Leg-6Corrosion Test (3 pcs)

Leg-1Electrical Loads(3 pcs)

11.5 Salt Spray Tests 11.5.3 Salt Mist Tests

5-point&Visual Inspection & dimension check after test

13.1.2 Dust protection

EMCReference:ISO11452CISPR 12 CISPR 25ISO7637ISO10605

9.1 DC Supply Voltage 9.2 Over Voltage 9.3 Superimposed Alternating Voltage 9.4 Slow decrease and increase of supply voltage 9.5 Discontinuities in supply voltage 9.6 Reversed voltage 9.7 Ground reference and supply offset 9.8 Open circuit tests 9.9 Short circuit protection 9.10 Withstand voltage 9.11 Insulation resistance9.12 Parasitic Current

13.2 Enclosure    13.2.1 Crush For Housing (Elbow Load)14 Connector test

Leg-3Salt Spray Tests(3 pcs)

Leg-7Chemical Loads(3 pcs)

Leg-8Dust protection(3 pcs)

Leg-9Enclosure Protection40 pcs(PCBA+Connector only)

12 Chemical Loads

11.8 Corrosion Test with Flow of Mixed Gas

1. 5-Point check & Dimension check before and after test 2. Low temperature wakeup before test